Installing TLS certificates on HP printers automatically

Installing a TLS (SSL) certificate on an HP LaserJet printer automatically isn’t as difficult as you might think

I wrote an article about installing a Let’s Encrypt TLS certificate on an HP LaserJet printer a while ago.  Since then, I’ve been annoyed by having to install updated certificates manually, so I decided to look at how I could automate it.

HP LaserJet printer control panel
Photo by Alex Furr from FreeImages

TechRadar has a great article on securing printers, but how do you automate it? Well, with a certificate authority like Let’s Encrypt for starters, but there’s no mechanism for the printer to automatically update its certificate after it expires.

I’ve set my desktop machine to certbot and renew the certificate automatically. An evening’s hacking around the web interface showed it’s really easy to install a certificate automatically.

This is the magic command to install the certificate:

curl -v --insecure https://HOSTNAME/hp/device/Certificate.pfx --form upload=@/tmp/cert.pfx --form Password=password

Replace HOSTNAME with the hostname of your printer and change /tmp/cert.pfx as required. If you want to know how to create the PFX file, see my original post.

Has anyone else found out how to do this? If they have, they’ve not posted about it!

15 thoughts on “Installing TLS certificates on HP printers automatically”

  1. Works great on some devices, but I have one laserjet that might be too old for that, and they apparently use different URLs for the InkJets

  2. I did try your command, but it fails for me.

    I changed the hostname accordingly, the location of the certificate file and the password to the export password.

    The error I receive is:
    HTTP error before end of send, stop sending
    <
    * Closing connection 0

  3. In the interest of paying it forward for others that may run across this page. Different HP printers have different ways of getting the certificates to them. You can (as I did) simply open up the certificate interface in Safari or Chrome and enable developer tools to figure out what the right call is. It seems to change every two or three printer generations. If you have a modicum of developer / debugging expertise, you can quickly deduce what the right one is for you if the above (or below) doesn’t work.

    The magic incantation for some of the more modern HP printers is:

    curl -silent --show-error --insecure "https://HOSTNAME/Security/DeviceCertificates/NewCertWithPassword/Upload?fixed_response=true" --form certificate=@"YourCert.pfx" --form password="PASSWORD"

    Replace HOSTNAME with the printer’s hostname/IP.
    Replace YourCert.pfx with the path to the PFX-encoded certificate.
    Replace PASSWORD with the password you used to encrypt the PFX-encoded certificate.

  4. On newer Laserjet models (eg: my M479fdw) which have a more “Javascripty” web interface, the upload URL is different – but a bit of snooping in the Chrome console reveals that it’s basically the same mechanism, just a different URL.

    curl -v --insecure -u admin:ADMIN_PASSWORD --form certificate=@cert.pfx --form password=PFX_PASSWORD https://PRINTER_HOSTNAME/Security/DeviceCertificates/NewCertWithPassword/Upload

    (that’s all one line).

    ADMIN_PASSWORD is the password for the ‘admin’ user you set in the printer’s web UI.
    PFX_PASSWORD is the password you set on the PFX certificate file.
    PRINTER_HOSTNAME is the network name or IP address of the printer.

    Hope this helps!

  5. Thank you very much. This works perfectly for me on a HP LaserJet Pro MFP M426dfw, with the URL: https://HOSTNAME/hp/device/Certificate.pfx

    One note. I needed to add credentials in order to complete the request; otherwise, I was receiving 401 (Unauthorized): curl -v --insecure -u admin:HP_WEB_PORTAL_ADMIN_PASSWD https://HOSTNAME/hp/device/Certificate.pfx

  6. be careful copying the commands here as a hyphen is turned into an em dash and the curl command will fail. Make sure all “-” are literal hyphens

  7. Hi i just try to Upload the pfx cert on my envy 4520. I have tried on web UI but then i get error code 0XB92E35D0. Than i have found your solution and try it with curl but comes the same error on printer display after upload. Here the answer from printer

    C:\curl\bin>curl -v –insecure -u admin:password –form certificate=@cert.pfx –form password=password https://192.168.178.60/Security/DeviceCertificates/NewCertWithPassword/Upload
    * Trying 192.168.178.60:443…
    * Connected to 192.168.178.60 (192.168.178.60) port 443 (#0)
    * ALPN: offers h2,http/1.1
    * TLSv1.3 (OUT), TLS handshake, Client hello (1):
    * TLSv1.3 (IN), TLS handshake, Server hello (2):
    * TLSv1.2 (IN), TLS handshake, Certificate (11):
    * TLSv1.2 (IN), TLS handshake, Server finished (14):
    * TLSv1.2 (OUT), TLS handshake, Client key exchange (16):
    * TLSv1.2 (OUT), TLS change cipher, Change cipher spec (1):
    * TLSv1.2 (OUT), TLS handshake, Finished (20):
    * TLSv1.2 (IN), TLS handshake, Finished (20):
    * SSL connection using TLSv1.2 / AES256-GCM-SHA384
    * ALPN: server did not agree on a protocol. Uses default.
    * Server certificate:
    * subject: CN=HP23A06A; L=Vancouver; ST=Washington; C=US; O=HP; OU=HP-IPG
    * start date: Jun 2 09:20:56 2020 GMT
    * expire date: May 31 09:20:56 2030 GMT
    * issuer: CN=HP23A06A; L=Vancouver; ST=Washington; C=US; O=HP; OU=HP-IPG
    * SSL certificate verify result: self-signed certificate (18), continuing anyway.
    * using HTTP/1.x
    * Server auth using Basic with user ‘admin’
    > POST /Security/DeviceCertificates/NewCertWithPassword/Upload HTTP/1.1
    > Host: 192.168.178.60
    > Authorization: Basic YWRtaW46VGVsaTA3MSEh
    > User-Agent: curl/8.0.1
    > Accept: */*
    > Content-Length: 5705
    > Content-Type: multipart/form-data; boundary=————————c96492a1322c6340
    >
    * We are completely uploaded and fine

  8. HTTP/1.1 500 Internal Server Error
    < Server: HP HTTP Server; HP ENVY 4520 series – K9T09B; Serial Number: TH85H5K0QN0660; Built:Tue Jun 02, 2020 09:20:56AM {CFP1FN2023BR}
    < Content-Length: 0
    < Cache-Control: must-revalidate, max-age=0
    < Pragma: no-cache
    <
    * Connection #0 to host 192.168.178.60 left intact

  9. Have a HP LaserJet color flow MFP M575 | HP FutureSmart 4 | 4.12.0.1

    For anyone else struggling (or just me in a few months when it breaks and I loose my config)

    Needed to disable CSRF protection 🙁
    https://HOSTNAME/hp/device/GeneralSecurity/Index

    I could be less lazy and hunt the page for the CSRF token and then submit, but I don’t have the energy for that right now

    then:

    curl https://YOURHOSTNAME/hp/device/SignIn/Index -v \
    -c ./cookies.txt \
    –form agentIdSelect=hp_EmbeddedPin_v1 \
    –form PinDropDown=AdminItem \
    –form PasswordTextBox=YOURPASSWORD \
    –form signInOk=Sign+In \
    –insecure && \
    curl -v -b ./cookies.txt –insecure \
    –form .Import_FileName_handle=@certificate.pfx \
    –form Finish=Finish \
    –form CSRFToken= \
    –form Hide=Hide \
    –form password=CERTPASSWORD \
    https://YOURHOSTNAME/websecurity/cert_import.htm/config

  10. I found this blog today, and it was enough for me to get this to work with my own printer. So, I thought, why not move it closer to full automation? Here’s a bash script I put together with the intention of eventually adding it to a system timer (much like the one certbot uses to renew the certificate).

    P.S. I hope that the blog comment doesn’t mess up the formatting:

    #!/bin/bash
    # Name: installhpcert.sh
    # Date: 2024-03-15
    # Author: Chuck Renner
    # License: MIT License https://opensource.org/license/mit (Use as you want and author is not liable)
    # Version 0.1.1 (alpha)
    # Inspired by and uses information from Peter Hicks's Blog:
    # https://blog.poggs.com/2020/03/18/printer-security-installing-tls-certificates-on-hp-printers-automatically/
    #
    # I have done limited testing on my own HP OfficeJet 5200 Series Printer. Other HP printers will
    # likely need different settings.
    #
    # If customizing, tweaking or troubleshooting, set VERBOSE=1 and comment out the lines at the end
    # that delete the temporary files (so that they can be examined).
    #
    # This script sources CONF (by default /etc/installhpcert.ini) for its settings.
    #
    # Script configuration parameters (set in CONF below; by default /etc/installhpcert.ini):
    # * INSECURE=0 - Set to 1 if the current printer certificate is expired, self-signed, or invalid.
    # * VERBOSE=0 - Set to 1 if you want to pass the -v option to curl. Helps with troubleshooting.
    # When set to 1 also provides additional output from this script.
    # * PHOST=hpabc123 - The hostname (without domain name) of the printer.
    # * PDOM=example.org - The domain name (without hostname) of the printer.
    # * NOTE: The combined PHOST.PDOM should be the printer Fully Qualified Domain Name (FQDN).
    # * NOTE: The printer FQDN should DNS resolve in your network. If it does not you may have to
    # fix DNS or tamper with your hosts file (fixing DNS is the correct way).
    # * PUSER=admin - This should be the administrative username for the printer.
    # * PPASS=password - This should be the password for the administrative user for the printer.
    # * LELIVE=/etc/letsencrypt/live - Location of the Let's Encrypt live folder
    # This script must be run as root or sudo (because access to the certificate key is restricted by
    # permissions and ownership by design).
    # This script assumes all of the following:
    # * The user has a compatible HP printer and wants to install a valid security certificate
    # * The user has a domain name that can be used for CA issued TLS certificates
    # * The DNS server for the user's network resolves PHOST.PDOM to the same HP printer
    # * The user already has Let's Encrypt certbot setup for PHOST.PDOM and it has issued a current
    # valid certificate for PHOST.PDOM
    # * (optional) Certbot is setup to automatically renew the same certificate
    # * The user has the administrator name and password for the printer in the configuration file
    # * openssl is current, correctly setup, and in the PATH
    # * curl is current, correctly setup, and in the PATH (I had to compile a current version of curl
    # manually because the one in apt for Ubuntu 22.04 was old and the one in snap for the same is
    # somewhat broken).
    # This script when configured correctly and run for a compatible HP printer should do all of the
    # following:
    # * Create a temporary, password encrypted PKCS12 file containing the certificate fullchain and
    # private key for PHOST.PDOM issued by Let's Encrypt certbot.
    # * Use curl to connect and authenticate to the printer (NOTE: if the printer currently has an
    # invalid, self-issued, or expired certificate, you must set the INSECURE configuration option
    # to 1 so that curl will connect anyway; Once the certificate is valid, subsequent runs can
    # have the INSECURE configuration option set back to 0.).
    # * Use a temporary cookie jar for maintaining a session for subsequent connections to the printer.
    # * Send the printer the encrypted PKCS12 file (and its random password) for it to install
    # * Dump the installed printer certificate information to stdout so that the user can verify the
    # certifate was installed on the printer.
    # * Delete all of the temporary files used by the script.
    # * Exit.
    # This script is intended to be automated and it should be possible to add this to a timer
    # (like the one certbot uses to update the certificate), but I haven't tried putting it on
    # a timer yet.

    # Configuration file location (change this setting if your configuration file is elsewhere)
    CONF=/etc/installhpcert.ini

    # Exit if user is script is not running with root privileges.
    if [ `id -u` -ne 0 ]
    then echo Run this script using sudo!
    exit
    fi

    # Load (source) the configuration file
    source $CONF

    # Define functions
    function str_random() {
    # str_random from https://www.baeldung.com/linux/generate-random-string-using-random
    array=()
    for i in {a..z} {A..Z} {0..9};
    do
    array[$RANDOM]=$i
    done
    printf %s ${array[@]::8}
    }
    function urlencode() {
    # urlencode and urldecode from https://gist.github.com/cdown/1163649
    # urlencode

    old_lc_collate=$LC_COLLATE
    LC_COLLATE=C

    local length="${#1}"
    for (( i = 0; i < length; i++ )); do
    local c="${1:$i:1}"
    case $c in
    [a-zA-Z0-9.~_-]) printf '%s' "$c" ;;
    *) printf '%%%02X' "'$c" ;;
    esac
    done

    LC_COLLATE=$old_lc_collate
    }
    function urldecode() {
    # urldecode

    local url_encoded="${1//+/ }"
    printf '%b' "${url_encoded//%/\\x}"
    }

    INSECURE_OPTION=
    VERBOSE_OPTION=
    if [ $INSECURE -eq 1 ]
    then INSECURE_OPTION=--insecure
    fi
    if [ $VERBOSE -eq 1 ]
    then VERBOSE_OPTION=--verbose
    fi
    # Temporary directory
    DUMPDIR=/tmp
    # Generate random password to encrypt the temporary PFX file (and to be passed to printer)
    PFXPASS=$(str_random)
    # Printer Fully Qualified Domain Name (FQDN)
    PFQDN=$PHOST.$PDOM
    # Encrypted temporary PKCS12 PFX file to make, encrypt, and upload
    PFX=$DUMPDIR/$PHOST.pfx
    # Cookie Jar file
    JAR=$DUMPDIR/$PHOST.cjar
    # Curl output files prefix
    OUT=$DUMPDIR/$PHOST
    # URL encode the printer username and password
    PUSER=$(urlencode $PUSER)
    PPASS=$(urlencode $PPASS)

    echo Creating encrypted PFX
    if [ $VERBOSE -eq 1 ]
    then echo Running openssl pkcs12 -export -out $PFX -inkey $LELIVE/$PFQDN/privkey.pem -in $LELIVE/$PFQDN/fullchain.pem -password pass:\
    fi
    openssl pkcs12 -export -out $PFX -inkey $LELIVE/$PFQDN/privkey.pem -in $LELIVE/$PFQDN/fullchain.pem -password pass:$PFXPASS
    chmod 666 $PFX
    echo Completed creating PFX

    echo Pushing encrypted PFX to printer \(with password\)
    if [ $VERBOSE -eq 1 ]
    then echo Running curl $VERBOSE_OPTION $INSECURE_OPTION --cookie-jar $JAR --cookie $JAR -u \"$PUSER:\\" \"https://$PFQDN/\" --output $OUT-1.html
    fi
    curl $VERBOSE_OPTION $INSECURE_OPTION --cookie-jar $JAR --cookie $JAR -u "$PUSER:$PPASS" "https://$PFQDN/" --output $OUT-1.html
    chmod 666 $JAR
    chmod 666 $OUT-1.html
    if [ $VERBOSE -eq 1 ]
    then echo Running curl $VERBOSE_OPTION $INSECURE_OPTION --cookie-jar $JAR --cookie $JAR -u \"$PUSER:\\" \"https://$PFQDN/Security/DeviceCertificates/1/Info\" --output $OUT-2.html
    fi
    curl $VERBOSE_OPTION $INSECURE_OPTION --cookie-jar $JAR --cookie $JAR -u "$PUSER:$PPASS" "https://$PFQDN/Security/DeviceCertificates/1/Info" --output $OUT-2.html
    chmod 666 $OUT-2.html
    if [ $VERBOSE -eq 1 ]
    then echo Running curl $VERBOSE_OPTION $INSECURE_OPTION --cookie-jar $JAR --cookie $JAR -u \"$PUSER:\\" --form \"certificate=@$PFX\" --form \"password=\\" --referer \"https://$PFQDN/Security/DeviceCertificates/1/Info\" \"https://$PFQDN/Security/DeviceCertificates/NewCertWithPassword/Upload\" --output $OUT-3.html
    fi
    curl $VERBOSE_OPTION $INSECURE_OPTION --cookie-jar $JAR --cookie $JAR -u "$PUSER:$PPASS" --form "certificate=@$PFX" --form "password=$PFXPASS" --referer "https://$PFQDN/Security/DeviceCertificates/1/Info" "https://$PFQDN/Security/DeviceCertificates/NewCertWithPassword/Upload" --output $OUT-3.html
    chmod 666 $OUT-3.html
    if [ $VERBOSE -eq 1 ]
    then echo Running curl $VERBOSE_OPTION $INSECURE_OPTION --cookie-jar $JAR --cookie $JAR -u \"$PUSER:\\" --referer "https://$PFQDN/Security/DeviceCertificates/NewCertWithPassword/Upload" \"https://$PFQDN/Security/DeviceCertificates/1/Info\" --output $OUT-4.html
    fi
    curl $VERBOSE_OPTION $INSECURE_OPTION --cookie-jar $JAR --cookie $JAR -u "$PUSER:$PPASS" --referer "https://$PFQDN/Security/DeviceCertificates/NewCertWithPassword/Upload" "https://$PFQDN/Security/DeviceCertificates/1/Info" --output $OUT-4.html
    chmod 666 $OUT-4.html
    echo Completed pushing PFX to printer

    if [ $VERBOSE -eq 1 ]
    then echo Deleting files $PFX, $JAR, $OUT-1.html, $OUT-2.html, $OUT-3.html
    echo PFX=$PFX
    fi
    rm $PFX
    rm $JAR
    rm $OUT-1.html
    rm $OUT-2.html
    rm $OUT-3.html
    if [ $VERBOSE -eq 1 ]
    then echo Completed deleting files
    fi

    echo Completed printer certificate push script
    echo Results:
    cat $OUT-4.html
    rm $OUT-4.html

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.